|
|
|
|
When a trigger condition tests TRUE, the alarm displays notifies you by automatically displaying the Alarm Notices Window. This window displays alarms in two ways:
Scrolling. Alarms scroll in from the bottom. Older
alarms are at the top. Eventually, alarms will scroll off the top and
out of view.
Static. When an alarm's trigger hits, the alarm
scrolls in at the bottom. Other alarms scroll in from the bottom as they
trigger, but older alarms are not pushed off the top. They remain in view.
If an alarm triggers again, it is highlighted in red for approximately
three seconds.
Scrolling is the default state. To invoke Static display, set the alarmfilter=on parameter in the workstation's setup.txt file.
To close this window, click close.
©2008 Aspen Research Group, Ltd. All rights reserved. Terms of Use.